Water-Based System
A fire fighting system is probably the most important of the building services, as its aim is to protect human life and property, strictly in that order a large network of pipes ending in either hydrants or sprinklers (nearly all buildings require both of these systems). KAIZEN Automation Pvt. Ltd. provided all kinds of fire protected services.
A wet pipe sprinkler system is fixed fire protection using piping filled with pressurized water supplied from a dependable source (either municipal or connected to a fire pump). As the water flows through the system, a flow alarm is initiated to indicate the system is operating.
KAIZEN provides water based sprinkler systems for properties throughout Bangladesh. Wet sprinkler systems are essential in buildings as they will help prevent the spread of fires while saving lives and properties. Our sprinklers are equipped with the latest technology and will respond quickly in the event of a fire.
KAIZEN supplies Pre-action systems to meet the fire fighting protection needs of all customers in Bangladesh. Our pre-action systems are activated once it detects a previous event like a smoke or fire alarm. We will provide the Double Interlock Pre-action System or the Single Interlock Pre-action System.
A deluge fire sprinkler system is similar to a pre-action system except the sprinkler heads are open and the pipe is not pressurized with air. Deluge systems are used in places that are considered high hazard areas such as power plants, aircraft hangars and chemical storage or processing facilities.
Certified Fire Pumps
-
Certified Fire Pump
-
Certified Vertical Turbine Fire Pump
-
Certified End Suction Fire Pump
-
Certified Horizontal Split Case Fire Pump
-
Certified Electric Motor
-
Certified Diesel Engine
-
Certified Electric Fire Pump Controller
-
Certified Diesel Fire Pump Controller
-
Certified Jockey Pump Controller
-
Certified Fuel Tank
A fire pump is any kind of pump that is part of a fire protection system’s water supply and powered by electric, diesel or steam. The pump intake is either connected to the public underground water supply piping, or a static water source (e.g., tank, reservoir, lake). Fire pumps are needed when the water supply cannot provide sufficient pressure to meet the hydraulic design requirements of the fire protection system.KAIZEN supplies UL certified fire pumps that comply with the highest international standards. We are the largest supply and service provider of certified fire pumps in Bangladesh market.
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Fire Driver® diesel engines are specially designed and manufactured for fire fighting applications according to UL1247 standard. The better torque characteristics of these engines ensure reliable operation in emergency conditions. These engines are UL listed and comply with the requirements for diesel engine drives as detailed in NFPA 20.
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
NAFFCO Jockey Pump Controllers are listed by Underwriters Laboratories (UL file number E309408), in accordance with UL 508A (Standard for Industrial Control Panel), NFPA 70 (National Electric Code) and NEMA Standards.Power ratings vary from 1.5 to 40 horsepower, 380 to 415 volts, 50 or 60 Hz.Only high quality UL listed or UL recognized components are used in these panels to guarantee the best possible reliability. Also high quality UL listed enclosures are used.The controller is completely wired, assembled and tested at the factory before shipment, and ready for immediate installation.
NAFFCO certified primary containment tank offers you a reliable solution for your fuel storage requirements related to fire pump diesel engine applications as required by NFPA 20. Design and fabrication of these tanks are done as per UL standard (UL 142), and installation and use shall be in accordance with NFPA 30.Each tank is subjected to thorough structural inspections and leakage test as specified by the design standard. The tanks that successfully pass the inspection and test are labelled as per UL specifications confirming their UL certification. These cylindrical, horizontally mounted, tanks are provided with necessary fittings and openings to facilitate quality service at field.
Custom Designed Fire Pumps
-
Custom Designed Fire Pumps
-
NPH Series Fire Pump Set
-
NPS Series Fire Pump Set
-
NPE Series Fire Pump Set
-
End Suction Pump
-
Horizontal Split Case Pump
-
Electric Motor
-
Diesel Engine
-
Custom Designed Controllers
-
Vertical Multistage Jockey Pump
-
Pressure Vessel
KAIZEN team will provide custom design fire pumps to meet the requirements of Client’s property. Every building has its own unique fire protection needs and we will tailor every product to your needs. We have our own team to provide full support to our client for firefighting solutions.
This model consists of one electric motor driven Fire Pump, diesel engine driven Fire Pump, one common Fire Pump Controller, pressure vessel, standard accessories and base frame. The electric pump shall be vertical/horizontal multistage type close/flexibly coupled to electric motor. The electric motor is squirrel cage induction type, suitable for 3 phases, with required horse power rating. The diesel engine is fixed on the base with anti-vibration rubber pads and the pump is close/flexibly coupled to diesel engine. According to the power output of the engine the electrical system can be either 12V or 24V DC. The diesel engine consists of starter motor, fuel system, lubricating system, exhaust system, etc.
This package consists of one main pump coupled to electric motor, one stand by pump coupled to diesel engine, jockey pump, pressure vessel, controller(s) for manual or automatic operation of the system and standard accessories on base frame(s). The fire pump shall be End Suction or Single Stage Horizontal Split Case or Horizontal Multi Stage Centrifugal type depending on the system capacity and head requirements. Electric motor is squirrel cage induction type and foot mounted suitable for 3 phase power supply, with required horse power rating. Electric fire pump is flexibly coupled to the motor. The diesel engine is fixed on the base with anti-vibration rubber pads and the pump is directly coupled to a diesel engine through flexible coupling, and according to the power output of the engine the electrical system can be either 12V or 24V DC.
This package consists of 2 electric motor driven fire pumps, (one is duty and another one is standby), jockey pump, pressure vessel, suction and discharge manifold, discharge pressure gauge, pressure switches, common controller for manual or auto operation of the system, standard accessories and base frame(s). The fire pumps shall be end suction or horizontal split case or horizontal multistage type. The electric motor is squirrel cage induction type and foot mounted suitable for 3 phase power supply. Jockey pump shall be vertical multistage type close coupled to electric motor.
- Fully complies with both performance and dimensional requirements of DIN 24255.
- The cast iron volute casing is of robust design with integrally cast feet, vertical top centerline discharge with axial suction incorporating cast inlet vane to give best flow to impeller eye.
- The bronze double shrouded type impeller is hydraulically balanced and positively driven by shaft key and axially locked between sleeve and impeller nut.
- The stainless steel shaft is fitted with a domed type locking nut.
- Replaceable wearing rings are fitted as standard to all casings and also to back covers on larger pumps which reduces maintenance time and cost.
- Stuffing box is fitted with Mechanical seal. Pump can be supplied with gland packing also.
- Bearings are ball type grease lubricated and sealed for life.
- Standardized design with reliable performance
- The cast iron casing is axially split which permits removal of the complete rotor without moving either piping or motor. Pumps generating high heads have double volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads.
- The bronze closed type impellers have double curved vanes. The double suction design gives practically zero axial forces. Each impeller is statically and dynamically balanced.
- The carbon steel shaft is fully sealed against the liquid being pumped. Shaft protecting sleeves are fitted in the seal area.
- Replaceable cast iron rings protect the casing at the impeller running clearances.
- Stuffing box is fitted with mechanical seal. Pump can be supplied with gland packing also.
- Bearings are grease lubricated deep groove ball type.
National Motors® totally enclosed fan cooled squirrel-cage induction motors are designed and manufactured to meet or exceed the latest IEC standards.
These motors have high efficiency, superior speed-torque and excellent electrical characteristics. These multi-purpose motors are the ideal choice for installation in arduous environmental conditions.
This range offers a variety of induction motors with a power rating of 0.75 kW to high powered motor providing 315 kW. These motors are highly engineered to cope up with sudden load increase, longer thermal life, higher altitudes and voltage variations. All the motors are manufactured under strict quality control procedures (ISO 9001) and are fully tested against the applicable standard.
Fire Driver® diesel engines are specifically designed for fire pump applications. The proven technologies used throughout the design and manufacturing ensures the reliable operation of these engines during fire condition.
These air-cooled direct injection diesel engines are smaller in volume, lighter in weight and lower in fuel consumption. The improved cooling and combustion properties results in the highly efficient performance of this engine. FD-AR series comprises of single cylinder 4 stroke air cooled diesel engines.
FD-RW series comprises of 3, 4, 8, 6 & 12 cylinder 4 stroke compression ignition type engines. These engines have improved performance and combustion efficiency. The characteristics such as high torque and heavy duty construction makes these engines a right choice for fire fighting applications.
These engines are subjected to rigorous performance tests prior to the dispatch to ensure that the performance ratings are achieved as required by the design specifications.
The common controller is fabricated from mild steel and epoxy powder coated to red color. These Control panels include the necessary features for automatic and manual operation along with alarms and indications for a number of critical conditions. They are tested prior to dispatch from factory to ensure reliable operation.
JVS / JVSS is a vertical multistage pump series with all wetted parts made of stainless steel. It is suitable for a variety different applications involving various liquids from potable water to industrial effluent.
Pump is rigidly coupled to a totally enclosed fan-cooled motor with Class F insulation and IP 55 enclosure rating, suitable for 50 Hz or 60 Hz power supply.
Its high head low capacity performance range makes it especially suitable for using as pressure maintenance pump (jockey pump) in fire fighting applications and it meets NFPA 20 requirements for jockey pumps.
Tanks of these pressure vessels are made of steel. From 10 liters to 1500 liters these tanks are provided with EDPM membrane and from 2000 liters to 5000 liters they are provided with butyl membrane. The high strength construction of the tank, durable membrane and quality fittings makes it the best choice for critical applications such as fire fighting. They are pre-pressurized at factory and are tested along with fire pumps prior to dispatch.
Industrial Packaged Fire Pump Sets
Massive Dynamic has over 10 years of experience in Design. We take pride in delivering Intelligent Designs and Engaging Experiences for clients all over the World.
Industrial Packaged Fire Pump Sets
NAFFCO package fire pump system consists of pumps, driver, controllers and accessories mounted on a common base frame. High quality UL / FM certified components are used in these systems complying with the requirements of NFPA 20. All necessary wiring between controllers and drivers are done at factory prior to shipment. The automatic air release valve, casing relief valve, suction gauge & discharge gauge are mounted on fire pumps and other accessories are mounted on pre-constructed interconnecting piping as required by NFPA 20. Pressure sensing lines are pre-installed on Electric, Diesel, and Jockey Controllers as per NFPA 20 requirements.
These systems are subjected to rigorous performance tests at factory as per UL, FM & NFPA standards to ensure proper performance of the system as per the design requirements. For completing the installation of these pre-engineered ‘ready to install’ packages the installing contractor only needs to grout the structural base, connect the suction & discharge pipes and incoming power.
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Fire Hydrants
-
Dry Type Pillar Fire Hydrants – UL/FM
-
Dry Type Pillar Fire Hydrants – Kitemark/LPCB
-
Under Ground Hydrant
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Fire Extinguishers
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Hoses & Accessories
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Fire Hose Rack Assembly
PU Lined Hose
Duralex Fire Hose, UL Listed
Delivery Hose Coupling
Handheld Branch Pipe
Standard Branch Pipe
Reels & Cabinets
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Valves & Risers
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements
Meet the most advanced live website builder on WordPress.
Featuring latest web technologies,enjoyable UX and the
most beautiful design trends. Simply drag&drop elements